i.topo.corr - GRASS GIS manual

NAME

i.topo.corr - Computes topographic correction of reflectance.

KEYWORDS

imagery, terrain, topographic correction

SYNOPSIS

i.topo.corr

i.topo.corr --help

i.topo.corr [-is] [input=name[,name,...]] output=name basemap=name zenith=float [azimuth=float] [method=string] [--overwrite] [--help] [--verbose] [--quiet] [--ui]

Flags:

-i: Output sun illumination terrain model
-s: Scale output to input and copy color rules
--overwrite: Allow output files to overwrite existing files
--help: Print usage summary
--verbose: Verbose module output
--quiet: Quiet module output
--ui: Force launching GUI dialog

Parameters:

input=name[,name,...]: Name of reflectance raster maps to be corrected topographically
output=name [required]: Name (flag -i) or prefix for output raster maps
basemap=name [required]: Name of input base raster map (elevation or illumination)
zenith=float [required]: Solar zenith in degrees
azimuth=float: Solar azimuth in degrees (only if flag -i)
method=string: Topographic correction method; Options: cosine, minnaert, c-factor, percent; Default: c-factor

DESCRIPTION
NOTES
EXAMPLES
REFERENCES
SEE ALSO
AUTHOR

DESCRIPTION

i.topo.corr is used to topographically correct reflectance from imagery files, e.g. obtained with i.landsat.toar, using a sun illumination terrain model. This illumination model represents the cosine of the incident angle i, i.e. the angle between the normal to the ground and the sun rays.

Note: If needed, the sun position can be calculated for a given date with r.sunmask.

Figure showing terrain and solar angles

Using the -i flag and given an elevation basemap (metric), i.topo.corr creates a simple illumination model using the formula:

cos_i = cos(s) * cos(z) + sin(s) * sin(z) * cos(a - o)

where, i is the incident angle to be calculated, s is the terrain slope angle, z is the solar zenith angle, a the solar azimuth angle, o the terrain aspect angle.

For each band file, the corrected reflectance (ref_c) is calculate from the original reflectance (ref_o) using one of the four offered methods (one lambertian and two non-lambertian).

Method: cosine

ref_c = ref_o * cos_z / cos_i

Method: minnaert

ref_c = ref_o * (cos_z / cos_i) ^k

where, k is obtained by linear regression of
ln(ref_o) = ln(ref_c) - k ln(cos_i/cos_z)

Method: c-factor

ref_c = ref_o * (cos_z + c)/ (cos_i + c)

where, c is a/m from ref_o = a + m * cos_i

Method: percent

We can use cos_i to estimate the percent of solar incidence on the surface, then the transformation (cos_i + 1)/2 varied from 0 (surface in the side in opposition to the sun: infinite correction) to 1 (direct exhibition to the sun: no correction) and the corrected reflectance can be calculated as

ref_c = ref_o * 2 / (cos_i + 1)

NOTES

The illumination model (cos_i) with flag -i uses the actual region as limits and the resolution of the elevation map.
The topographic correction use the full reflectance file (null remain null) and its resolution.
The elevation map to calculate the illumination model should be metric.

EXAMPLES

First, make a illumination model from the elevation map (here, SRTM). Then make perform the topographic correction of e.g. the bands toar.5, toar.4 and toar.3 with output as tcor.toar.5, tcor.toar.4, and tcor.toar.3 using c-factor (= c-correction) method:

# first pass: create illumination model
i.topo.corr -i base=SRTM zenith=33.3631 azimuth=59.8897 output=SRTM.illumination

# second pass: apply illumination model
i.topo.corr base=SRTM.illumination input=toar.5,toar.4,toar.3 output=tcor \ 
  zenith=33.3631 method=c-factor

REFERENCES

Law K.H. and Nichol J, 2004. Topographic Correction For Differential Illumination Effects On Ikonos Satellite Imagery. International Archives of Photogrammetry Remote Sensing and Spatial Information, pp. 641-646.
Meyer, P. and Itten, K.I. and Kellenberger, KJ and Sandmeier, S. and Sandmeier, R., 1993. Radiometric corrections of topographically induced effects on Landsat TM data in alpine terrain. Photogrammetric Engineering and Remote Sensing 48(17).
Riaño, D. and Chuvieco, E. and Salas, J. and Aguado, I., 2003. Assessment of Different Topographic Corrections in Landsat-TM Data for Mapping Vegetation Types. IEEE Transactions On Geoscience And Remote Sensing, Vol. 41, No. 5
Twele A. and Erasmi S, 2005. Evaluating topographic correction algorithms for improved land cover discrimination in mountainous areas of Central Sulawesi. Göttinger Geographische Abhandlungen, vol. 113.

AUTHOR

E. Jorge Tizado (ej.tizado unileon es)
Dept. Biodiversity and Environmental Management, University of León, Spain

Figure derived from Neteler & Mitasova, 2008.

SOURCE CODE

Available at: i.topo.corr source code (history)

Latest change: Monday Nov 18 20:15:32 2019 in commit: 1a1d107e4f6e1b846f9841c2c6fabf015c5f720d